logo de institución
Journal of Applied Research and Technology
Revista Activa *
ISSN: 1665-6423
Universidad Nacional Autónoma de México

Revista en DOAJ

Normas para autores

Página de la revista
Sitio web de la institución editora

Redalyc 3.0 versión beta.
La versión estable de Redalyc 3.0 se libera en febrero de 2017. En la actualidad, se muestran los resultados de la marcación de artículos científicos mediante la herramienta gratuita Marcalyc, liberada en su primera versión el 1ro de septiembre de 2016 y que está pensada como un elemento central en la construcción y consolidación de un modelo de AA sustentable para Iberoamérica.
en: Monitoring of water sources is a major concern worldwide. Wireless sensor networks (WSN) may be used for this monitoring. However, current systems employ mainly physical sensors for variables such as temperature, pressure, humidity and light. Wireless chemical sensors networks (WCSNs) for environmental monitoring are scarce due to the lack of autonomy of conventional sensors. This paper presents results of a WCSN for monitoring pH based on ion selective field effect transistors (ISFETs). Sensing nodes employ a human interface required for in situ calibration of chemical sensors. Unlike most studies, our work evaluates the network employing chemical measurements and wireless network metrics. Results show zero packet losses by using a time division multiple access (TDMA) protocol. The network allows wireless communication within 300 m including attenuation from buildings and trees. Therefore, the system presented in this paper is suitable for long range applications with unobstructed line of sight. pH measurements present a standard deviation below 1%, showing high repeatability. When compared to a commercial pH meter, difference in measurements is below 5%. As a consequence, accuracy is adequate for the application. Measurements also presented high stability during 3 h of continuous measurement.>>>
Claudia Manjarrés
Crea tu propia página
David Garizado
Crea tu propia página
Natalia Socarras
Crea tu propia página
Cecilia Jimenez-Jorquera
Crea tu propia página
en: This paper presents a simple and systematic approach to formulate the inverse position problem of a Schönflies parallel manipulator. As a result, the inverse position problem is solved in closed form and leads directly to the automatic generation of the workspace of the manipulator. Additionally, a systematic velocity analysis is also presented, which allows to detect and characterize all the singularities related to this manipulator. All Rights Reserved © 2016 Universidad Nacional Autónoma de México, Centro de Ciencias Aplicadas y Desarrollo Tecnológico. This is an open access item distributed under the Creative Commons CC License BY-NC-ND 4.0.>>>
J. Jesús Cervantes-Sánchez
Crea tu propia página
José María Rico-Martínez
Crea tu propia página
Víctor Hugo Pérez-Muñoz
Crea tu propia página
en: In this present investigation, 2-imino-(3,4-dimethoxybenzyl)ethane sulphonic acid was anchored on a silver nanoparticle mediated by sugarcane sap. The Schiff base was synthesized from 2-aminoethanesulphonic acid and 3,4-dimethoxybenzaldehyde under lemon juice catalyzed conditions while the nanoparticles were obtained by careful stirring of sugarcane sap and 1 mM AgNO 3 in the ratio of 1:10 respectively at room temperature. The resulting nanocomplex was formed by gentle heating and stirring of the silver nanoparticles solution and the ligand at a temperature of about 80 ◦ C for 3 h. The ligand, nanoparticles and nanocomplex were characterized using UV–vis spectrophotometer, scanning electron microscope, FT-IR and XRD machines. From the UV–vis results, surface plasmon bands (SPBs) were observed at 475 nm for the nanoparticle within 1 h of the reaction and 450 nm for the nanocomplex. The ligand exhibited absorption bands at 310 nm, 280 nm and 230 nm which are due to  - electron transitions within the chromophores. The strikingly broad nature of the SPBs especially in the nanoparticles revealed that the particles are kinetically favored, nucleate easily and are polydispersed and the blue shift observed in the nanocomplex suggested further reduction in the particle size therefore giving us a clue on how to tailor the products by tuning the raw materials. From the scanning electron micrographs, the morphologies and growth mechanisms revealed oriented attachment for the nanoparticles onwards digestive ripening for the nanocomplex. All the synthesized materials proved to be potential antibacterial agents as they showed great inhibition to the growth of some bacterial strains with the activity enhanced in the nanocomplex.>>>
Elias Emeka Elemike
Crea tu propia página
Enock Olugbenga Dare
Crea tu propia página
Inyang David Samuel
Crea tu propia página
Jude Chinedu Onwuka
Crea tu propia página
en: Polyacrylonitrile precursor fibers prepared using a solvent-free coagulation process were stabilized, carbonized, and physically activated by carbon dioxide into activated carbon fibers (ACFs). The activation temperature varied from 600 to 900 ◦ C while the activation time was 1 h. Atomic force microscopy was used to observe the surface morphology, as well as the surface roughness of the ACFs. Higher pyrolysis temperature formed rougher surfaces, and increased the pore sizes. Meanwhile, Fourier transform infrared spectroscopy revealed more conversion of oxygen containing functional groups to carbonaceous materials as the activation temperature increased. Moreover, the microstructure properties were thoroughly characterized by the X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) studies. XRD analysis showed that the activation of the ACFs shrank the ordered structure, reducing the D-spacing from 0.358 to 0.347 nm for the fibers prepared at activation temperatures of 600 to 900 ◦ C. Meanwhile, XPS analysis concluded that that the oxygen containing functional groups were still retained even at high activation temperatures while the nitrogen containing functional groups were reduced during the high temperature activation in the CO 2 atmosphere.>>>
Norhaniza Yusof
Crea tu propia página
Ahmad Fauzi Ismail
Crea tu propia página
Takeshi Matsuura
Crea tu propia página
en: The stability of a ring of coupled van der Pol oscillators is studied in this work considering a non-uniform distribution of the coupling parameter along the ring. The stability analysis is based on the transformation of the linearized equation of the ring into a canonical Hill equation. A stability condition is derived considering the stability of the non-periodic term of the Hill equation. Stable and unstable dynamic behavior of the ring is studied by means of numerical simulations.>>>
Miguel Angel Barron
Crea tu propia página
en: 3D integrated circuits (3D-ICs) is an emerging technology with lots of potential. 3D-ICs enjoy small footprint area and vertical interconnections between different dies which allow shorter wirelength among gates. Hence, they exhibit both lesser interconnect delays and power consumption. The design flow of 3D integrated circuits consists of many steps, the first of which is the 3D Partitioning and Layer Assignment. This step has a significant importance as its outcome will influence the performance of subsequent steps. Like other partitioning problems this one is also an NP-hard. The approach taken to address this critical task is the application of iterative heuristics (Sait & Youssef, 1999), as they have been proven to be of great value when it comes to handling such problems. Many aspects have been taken into consideration when attempting to solve this problem. These factors include layer assignment, location of I/O terminals, TSV minimization, and area balancing. Ta bu Search and Simulated Annealing are employed and engineered to tackle this task. Results on well-known benchmarks show that both these techniques produce high quality solutions. The average percentage of the area deviation between layers is around 2.4% and the total number of required TSVs is reduced. All Rights Reserved © 2015 Universidad Nacional Autónoma de México, Centro de Ciencias Aplicadas y Desarrollo Tecnológico. This is an open access item distributed under the Creative Commons CC License BY-NC-ND 4.0.>>>
Feras Chikh Oughali
Crea tu propia página
Mohammed Al-Asli
Crea tu propia página
en: The objective was to research the physical and chemical properties of collagen scaffolds (CS) obtained from bone matrix Nukbone ® subject to a demineralization process using hydrochloric acid. The CS samples were characterized by optical and scanning electron microscopy, elemental chemical analysis, X-ray diffraction, spectroscopy Infrared, thermal analysis, differential scanning calorimetry and nitrogen adsorption. The microanalysis were used to set the macro- and microstructures of CS. They showed that the CS retained the morphology of Nukbone ® with interconnected pores and their size between 100 and 500  m, and it is composed of 20% by weight of HA and the rest is collagen type I. By infrared spectroscopy the functional groups of collagen type I (amide A – 3285, B – 2917, I – 1633, II – 1553 and III – 1239 cm − 1 ) were identified. By thermal analysis it was determined that the phenomenon of denaturation of the collagen type I began in the range of 75–85 ◦ C and burned above 200 ◦ C.>>>
B.H. León-Mancilla
Crea tu propia página
M.A. Araiza-Téllez
Crea tu propia página
J.O. Flores-Flores
Crea tu propia página
M.C. Piña-Barba
Crea tu propia página
Sistema de Información Científica Redalyc
Red de Revistas Científicas de América Latina y el Caribe, España y Portugal
Universidad Autónoma del Estado de México
Versión 3.0 beta | 2016
Pie piepag